UCi Adept NFT Nitrile Palm Coated Gloves (case of 120 Pairs)
UCi Adept NFT Nitrile Palm Coated Gloves (Case of 120 Pairs) feature a Nylon and Lycra blend liner providing one of the most comfortable and supportive gloves on the market. Patented NFT coating, specially developed for when precision handling is required, Adept NFT Nitrile Palm Coated Gloves produces unrivalled grip on dry, wet and oily conditions.
Providing class leading abrasion resistance greater than 25,000 cycles, Adept NFT Gloves are tough gloves. Certified to the OEKO-Tex standard 100 for environmentally friendly textiles, Adept NFT Nitrile Palm Coated Gloves also provide enhanced breathability thanks to their inclusion of the innovative "Sanitized" hygiene fabric system.
What's Included?
To purchase these gloves in single pairs, please see the standard listing.
Sizing Information for Adept NFT Palm Coated Nitrile Safety Gloves
To find your perfect size, simply measure the circumference of your palm (ignoring the thumb area) and the length of your hand as indicated in the image below. Once you have your measurements, please consult the sizing chart below to find the correct size for your hand.
| Size | Circumference of Palm (mm) | Length of Palm (mm) |
| Size 6 (Extra Small) | 152mm | 160mm |
| Size 7 (Small) | 178mm | 171mm |
| Size 8 (Medium) | 203mm | 182mm |
| Size 9 (Large) | 229mm | 192mm |
| Size 10 (Extra Large) | 254mm | 204mm |
Key Features and Benefits
- Revolutionary NFT palm coating provides maximum level 4 abrasion resistance rating
- Level 1 contact-heat resistant for fifteen seconds up to 100°C
- Breathable design and "Sanitized" fabric system allows sweat and odour to exit naturally
- Across-the-board EN 388 mechanical hazard protection
- Safe against punctures, tears, abrasions and cut
- Nitrile coating soaks up oil and moisture for enhanced grip in damp and wet conditions
- Available in five different sizes for a guaranteed perfect fit
Resistance Ratings and Standards for Adept NFT Gloves
EN 388
EN 388 is a European regulation governing the sale of gloves used for safety and protection. It determines the gloves' performance when used for protection against mechanical machinery by measuring the fabric's abrasion, cut, tear and puncture resistance.
The EN 388 cut resistance test uses a single sharp implement to repeatedly pressure a glove in order to determine the amount of force required to cause visible and functional damage.
| Standard | Resistance Rating |
| Abrasion Resistance | Level 4 |
| Cut Resistance | Level 1 |
| Tear Resistance | Level 3 |
| Puncture Resistance | Level 1 |
| ISO Cut Resistance | N/A |
EN 407
EN 407 is a European safety regulation governing the sale of gloves and garments that are resistant to any number of fire, heat and molten related hazards. Please view the table below to find out more:
| Standard | Resistance Rating |
| Burning | N/A |
| Contact Heat | Level 1 (100°C) |
| Convective Heat | N/A |
| Radiant Heat | N/A |
| Molten Metal (Small Splashes) | N/A |
| Molten Metal (Large Splashes) | N/A |
What Do These Standards Mean?
Adept NFT Safety Gloves have a high abrasion resistance rating. This means they will not wear down over time and are suited to constant contact with boxes, products, material and debris.
A Level 1 contact heat resistance rating ensures the user can carry, handle and move heated material with a temperature not exceeding 100°C for up to fifteen seconds. This is ideal for foundry workers and machinists who need to safely transfer hot and hazardous material.
What Applications Suit NFT Nitrile Coated Safety Gloves?
Due to their high abrasion resistance and nitrile coating, NFT Safety Gloves are designed for use in high-traffic packing and picking environments. See below for a few examples:
Nitrile Coating Benefits
Nitrile is an incredibly flexible coating that provides additional resistance to oil, fuel and chemicals. Nitrile is used as a protective coating in gloves because it matches the pliability of latex with the hazard and injury protection properties of a heavier, woven glove.
Palm-Only Coating Benefits
A palm only coating allows the back of a glove to breath. Full coatings trap odour and can become sweaty because they do not allow for a natural flow of air. A palm only coating keeps the vulnerable palm area protected whilst remaining light and breathable in the face of heavy perspiration and odour. If you like a lighter, inobtrusive style, a palm only coating is ideal.
Innovative "Sanitized" Odour and Perspiration Relief
The Sanitized fabric hygiene system helps to reduce the growth and spread of microorganisms that are particularly problematic, such as clostridia and other antibiotic-resistant bacteria. This is particularly beneficial to work gloves because of the build up sweat and the risk of cross contamination from hand to face throughout the day.
Documentation for the Adept Gloves
| Conformity Statement | Instructions for Use |
 | |
Delivery
This item will be dispatched by Royal Mail, DPD courier or UPS courier.
The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).
Orders that are placed before 14:00 on a working day are usually dispatched on the same day; for orders placed outside this timeframe, they are normally dispatched the next working day.
UK Delivery Charges
Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.
| Order Value | UK Delivery Charge |
|---|
| Up to £39.99 | £4.95 |
| £40.00 and over | FREE |
Please note: orders to NON-mainland UK and the Scottish highlands may be subject to an additional delivery charge, dependent on the size and value of the order.
What is EN 388?
You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.
There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.
How Do I Read the EN 388 Score?
Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.
Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.
Where Can I Find Out More?
This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
