Portwest A689 35cm Cut-Resistant HPPE Grey Sleeve (Case of 192 Sleeves)
With exceptional cut and heat resistance, the Portwest A689 35cm Cut-Resistant HPPE Grey Sleeve (Case of 192 Sleeves) performs excellently when used as extra protection during tasks such as fabrication, foundry and glass manufacture. With a thumb hole for a secure fit, the Portwest Grey Sleeve uses super tough HPPE to provide exceptional abrasion, cut and tear protection.
Save Money By Buying in Bulk
The Portwest A689 35cm Cut-Resistant HPPE Grey Sleeve is highly popular, and with this offer you can buy a case of 192 single sleeves for a discounted price. Ideal for businesses that require high levels of health and safety, this offer lets you save money on your essential safety wear. To purchase a single sleeve, please see the standard listing.
Mechanical Properties of the Portwest A689 35cm HPPE Grey Sleeve
The Portwest Cut-Resistant Grey Sleeve offers excellent protection against a wide range of mechanical risks. It has been tested in accordance with EU standards to ensure a high level of performance. Please find the results below:
EN 388
| Hazard | Level of Resistance |
| Abrasion Resistance | Level 4 |
| Cut Resistance | Level 5 |
| Tear Resistance | Level 4 |
| Puncture Resistance | N/A |
EN 407
| Hazard | Level of Resistance |
| Burning | N/A |
| Contact Heat | Level 1 |
| Convective Heat | N/A |
| Radiant Heat | N/A |
| Molten Metal (Splashes) | N/A |
| Molten Metal (Large Quantities) | N/A |
Ideal for Use with Sharp Materials
The Portwest 35cm Cut-Resistant HPPE Sleeve is ideal at offering extra forearm protection to one of our Cut-Resistant Gloves. It uses a tough HPPE liner to provide excellent cut protection, ensuring that the forearm stays safe when handling items such as glass, metals and steel.
Features of the Portwest 35cm Cut-Resistant HPPE Sleeve A689GR
- Exceptional cut resistance provided by HPPE liner
- Features a thumb hole for a tight and secure fit
- Fitted with a 13 gauge liner that provides dexterity
- Designed to withstand contact temperatures of up to 100°C
- Low linting design reduces the risk of product contamination
- High abrasion resistance means the sleeve is long lasting
- Features 35cm length that protects entire forearm
- Suitable for use with food
- Available in a range of sizes on our website
- This size is also available as a Yellow HPPE Sleeve
- Please note that the Portwest Sleeve is sold as a single sleeve
Suitable for a Range of Industries
The Cut-Resistant HPPE Grey Sleeve is ideal for use in high cut risk industries. It can be used inside and outside, in dry, wet and oily conditions and in clean and dirty environments. Some applications where the sleeve is recommended includes:
- Assembly
- Automotive
- Building
- Can handling
- Ceramics
- Construction
- Electronics
- Engineering
- Food handling
- Food manufacture
- General handling
- Glass
- Industrial work
- Local authorities
- Machinist
- Mechanics
- Maintenance
- Materials handling
- Metal handling
- Oil and gas
- Outdoor work
- Railway maintenance
- Sheet metal handling
- Steel sheet handling
- Transport
- Utilities
- Welding
Product Code
The code for the 35cm Cut-Resistant Sleeve is:
Sizing of the Portwest 35cm Cut-Resistant HPPE Sleeve
The Portwest 35cm Cut-Resistant Grey Sleeve A689GR is available in one size that should suit most users. The length is 35cm and offers protection to the entire arm.
Documentation for the Portwest Cut-Resistant HPPE Sleeve
| Conformity Statement | Instructions for Use |
 | |
Delivery
This item will be dispatched by Royal Mail, DPD courier or UPS courier.
The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).
Orders that are placed before 14:00 on a working day are usually dispatched on the same day; for orders placed outside this timeframe, they are normally dispatched the next working day.
UK Delivery Charges
Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.
| Order Value | UK Delivery Charge |
|---|
| Up to £39.99 | £4.95 |
| £40.00 and over | FREE |
Please note: orders to NON-mainland UK and the Scottish highlands may be subject to an additional delivery charge, dependent on the size and value of the order.
What is EN 388?
You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.
There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.
How Do I Read the EN 388 Score?
Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.
Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.
Where Can I Find Out More?
This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.
.jpg)