Portwest A672 CS Cut Level F Heat-Resistant Handling Gloves

Size

£4.37

(£5.24 Inc. VAT)

–

+

Pair of cut and heat-resistant gloves
Ideal for a range of handling, construction, and warehousing tasks
Reflective label offers improved visibility in dim settings
Nitrile foam coat enhances grip on wet and dry components

FREE UK delivery

On all orders of £40 and above.

Buying in bulk?

Find out about purchase orders.

Got a question?

Get in touch with our sales team.

Information

Portwest A672 CS Cut Level F Heat-Resistant Handling Gloves

For effective protection from sharp, abrasive, and hot materials in a range of more industrial environments, try the Portwest A672 CS Cut Level F Heat-Resistant Handling Gloves. These fantastic gloves are designed with level F cut-resistance, and contact heat resistance up to 100°C, making them ideal for a range of handling and warehousing tasks. For optimal convenience, the gloves also feature a touchscreen-compatible design.

What's Included?

1 x Pair of Gloves

Which Glove Size Should I Choose?

The Portwest A672 gloves are supplied in a range of sizes suitable for various users. If you're not sure which glove size to choose, measure the length of your hand and the circumference of your palm at the knuckle excluding the thumb (as seen below). Once you have these measurements, you can compare them to the below sizing table to determine the best fit for your hands.

hand measurement guide showing the palm circumference and hand length

Size	Palm Circumference	Hand Length
Size 7 (Small)	178mm	171mm
Size 8 (Medium)	203mm	182mm
Size 9 (Large)	229mm	192mm
Size 10 (Extra Large)	254mm	204mm
Size 11 (XX-Large)	279mm	215mm

How Can the Nitrile Coated Gloves Protect My Hands?

These gloves are designed to keep your hands safe during a range of industrial tasks, and include a range of handy safety features such as:

Level F cut-resistant reduces the risk of wounds and lacerations when working with sharp materials
Nitrile foam coat significantly enhances glove grip on wet and dry components
Level 1 contact heat resistance enables secure, brief handling of materials up to 100°C
Abrasion-resistant design enables secure handling of coarse materials

Testing to European Standards

EN388 (Mechanical Resistance)

EN388: 4X44F

Hazard	Resistance Level
Abrasion Resistance	Level 4
Cut Resistance	N/A
Tear Resistance	Level 4
Puncture Resistance	Level 4
ISO Cut Resistance	Level F

EN407 (Heat Resistance)

EN407: X1XXXX

Hazard	Resistance Level
Burning Behaviour	N/A
Contact Heat	Level 1 (100°C)
Convective Heat	N/A
Radiant Heat	N/A
Small Splashes of Molten Metal	N/A
Large Splashes of Molten Metal	N/A

Other

ANSI/ISEA 105: 2016 Cut Level (A7)
ANSI/ISEA 105: 2016 Puncture Level (4)
ANSI/ISEA 105: 2016 Abrasion Level (6)

Who Can Use These Handling Gloves?

These quality gloves are suitable for a range of tasks, particularly those that involve handling various materials, and work with sharp components. Suitable applications for these gloves include (but are not limited to):

General Handling
Sheet Metal Handling
Glass Handling
Glass Manufacturing
Building and Construction
Scaffolding
Demolition
Machinist
Maintenance
Metal Fabrication
Assembly
Warehousing
Shipping

Key Features and Benefits

Pair of 13-gauge gloves
Ideal for a range of handling, construction, and industrial tasks
Offers a high level of cut resistance to protect from wounds and lacerations
Contact heat resistance up to 100°C enables brief, intermittent handling of hot materials
Nitrile foam coat enhances the glove's grip on wet and dry components
Reflective label improves wearer visibility in dim conditions
Protects your hands while handling coarse or abrasive materials
Touchscreen compatible design for optimal convenience
Reinforced thumb crotch ensures a durable design for prolonged protection
Available in a range of sizes suitable for various users

Materials

Liner: HPPE, Nylon, Glass Fibre, Elastane
Coat: Nitrile Foam

Additional Documents

Declaration of Conformity

Delivery

This item will be dispatched by Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

Orders that are placed before 14:00 on a working day are usually dispatched on the same day; for orders placed outside this timeframe, they are normally dispatched the next working day.

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

Order Value	UK Delivery Charge
Up to £39.99	£4.95
£40.00 and over	FREE

Please note: orders to NON-mainland UK and the Scottish highlands may be subject to an additional delivery charge, dependent on the size and value of the order.

What is EN 388?

You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.

There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.

How Do I Read the EN 388 Score?

Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.

Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.

Where Can I Find Out More?

This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.

What is EN 407?

You might have noticed that this product adheres to EN standard EN 407. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.

There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 407. EN 407 stands for Protective Gloves Against Thermal Risks, and informs you of your gloves' resistance to burns, contact heat, convective heat, radiant heat and small and large splashes of molten metal.

How Do I read the EN 407 Score?

Reading your EN 407 score is simple, as each hazard will be provided with a score between Level 0 and Level 4. Level 0 means the gloves failed against that particular hazard, and Level 4 means that they provide the best protection possible against that hazard.

Where Can I Find Out More?

This is just a brief overview of EN standard EN 407 so you know where you are standing. For further information, you can see the Heat Safety Introductory Blog that introduces EN 407 in a simple, easy to read article.

Sizing Information

What Size of Skytec Gloves Should I Choose?

1. Measure the circumference of your hand
2. Match to the table below
3. Select the size for you by clicking on the drop down menu at the top of the page

Indications of Where to Measure Your Hand