Delivery

This item will be dispatched by Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

Orders that are placed before 14:00 on a working day are usually dispatched on the same day; for orders placed outside this timeframe, they are normally dispatched the next working day.

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

Please note: orders to NON-mainland UK and the Scottish highlands may be subject to an additional delivery charge, dependent on the size and value of the order.

Gloves from ATG can be washed safely in the following way:

1. Use commercial laundry soap or detergent (do NOT use dry cleaning solutions!)
2. Wash in warm to medium hot water, do not exceed 104°F (40°C)
3. Wash for 10 minutes
4. Rinse in cold water.
5. Repeat wash and rinse if soiling is especially heavy
6. Rinse in cold water
7. Tumble dry - maximum temperature 140°F (60°C)

When laundering gloves that have especially heavy dirt or grease, include several pieces of heavy canvas in the second wash cycle - friction from the canvas against the gloves helps loosen and remove deep dirt.

IMPORTANT NOTE

During the use of gloves and the laundering process glove performance can and will deteriorate. For critical areas requiring cut and heat resistance tests need to be conducted after use and laundering to ensure that the performance criteria still meet the needs of those using the glove. Safety Gloves can accept no liability once gloves have been washed.

What is EN 388?

You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.

There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.

How Do I Read the EN 388 Score?

Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.

Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.

Where Can I Find Out More?

This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.