UCi KoolGrip Hi-Vis Yellow Heat- and Cold-Resistant Gloves

(2 Reviews)

Size

Size 8 (Medium)

Size 9 (Large)

Size 10 (Extra Large)

Size 11 (XX-Large)

£1.50

(£1.80 Inc. VAT)

–

+

Latex palm coated gloves with grippy double dipped fingers
Provides heat and cold resistance for a variety of applications and industries
Suitable for handling materials up to 250°C
High-visibility yellow colour for use in dim/ low lighting conditions

FREE UK delivery

On all orders of £40 and above.

Buying in bulk?

Find out about purchase orders.

Got a question?

Get in touch with our sales team.

Information

UCi KoolGrip Hi-Vis Yellow Heat- and Cold-Resistant Gloves

Tested and certified to provide heat and cold resistance, the UCi KoolGrip Hi-Vis Yellow Heat- and Cold-Resistant Gloves are unique safety gloves for a variety of applications where either cold or heat hazards are present. A crinkle latex coated exterior ensures superior grip during handling, while a high-visibility yellow outer provides easy recognition during applications in dim or low lighting.

what's Included?

1 x Pair of Gloves

Sizing of the KoolGrip Hi-Vis Thermal Gloves

To ensure that you have the best possible fit from your gloves, the KoolGrip Hi-Vis Gloves are available in four sizes that should be suited to most users. To find the best size for your hands, simply measure the circumference of your palm and the length of your hand as shown in the diagram below. Once you have these measurements, please match your results to the sizing table and select your desired size from the drop-down at the top of the page.

Indications of Where to Measure Your Hand

Size	Palm Circumference	Hand Length
Size 8 (Medium)	203mm	182mm
Size 9 (Large)	229mm	192mm
Size 10 (Extra Large)	254mm	204mm
Size 11 (XX-Large)	279mm	215mm

These gloves are also available in a pack of 100 pairs.

Applications of the Koolgrip Hi-vis gloves

Designed to provide protection from cold or heat while also promoting superior levels of grip, the high-quality, durable KoolGrip Gloves have a number of applications. This includes (but is not limited to) the following:

Building and construction
Warehousing
Logistics
Railway maintenance
Sheet-metal work
General cold handling
Mining

Tested To EN Safety Standards

The KoolGrip Hi-Vis Heat and Cold Resistant Gloves have been tested against mechanical risks under the European standards EN 388, EN 511, and EN 407. EN 388 tests the gloves' protection against hazards such as cuts, tears, puncture, and abrasion, while EN 511 tests the protection the gloves provide against cold hazards, and EN 407 tests for protection against heat hazards.

EN 388 Mechanical Resistance

EN 388: 2142X

Hazard	Resistance Level
Abrasion Resistance	Level 2
Cut Resistance	Level 1
Tear Resistance	Level 4
Puncture Resistance	Level 2
ISO Cut Resistance	N/A

EN 511: Cold Resistance

EN 511: 02X

Hazard	Level of Resistance
Convective Cold Resistance	Level 0
Contact Cold Resistance	Level 2
Water Permeability	N/A

EN 407: Heat Resistance

EN 407: X2XXXX

Hazard	Resistance Level
Burning Behaviour	N/A
Contact Heat	Level 2 (250°C)
Convective Heat	N/A
Radiant Heat	N/A
Small Splashes of Molten Metal	N/A
Large Splashes of Molten Metal	N/A

Features and Benefits of the KoolGrip Gloves

Thick thermal brushed polyester liner keeps hands warm in cold environments
Contact heat level 2 tested for use up to 250°C
Premium crinkle latex coating for superior grip
Dual coating on the fingertips for added durability
Thermal brushed polyester lining for insulation against cold
Bright yellow exterior for high visibility
Four sizes available to suit most users

Multi-Purpose Construction

The KoolGrip Gloves are unique, as they are built specifically for use in cold conditions while undertaking general handling applications, but also provide contact heat resistance for applications with heat hazards. These gloves use a thick thermal brushed polyester liner with excellent insulating capacities to keep hands warm in cold environments, while their comfortable specially developed crinkle latex finish ensures high grip even in slippery conditions.

Documentation

Delivery

This item will be dispatched by Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

Orders that are placed before 14:00 on a working day are usually dispatched on the same day; for orders placed outside this timeframe, they are normally dispatched the next working day.

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

Order Value	UK Delivery Charge
Up to £39.99	£4.95
£40.00 and over	FREE

Please note: orders to NON-mainland UK and the Scottish highlands may be subject to an additional delivery charge, dependent on the size and value of the order.

What is EN 388?

You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.

There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.

How Do I Read the EN 388 Score?

Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.

Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.

Where Can I Find Out More?

This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.

Reviews

Write a Review and share your opinions!

2 Reviews:

Safety gloves

Rating:

21 June 2018 | Lee

The gloves arrived well packed. The service i got from the post was good. I work as a driver delivering frozen and chilled food and are fit for purpose.
I would buy them again

Was this helpful to you? Yes / No

Safety gloves

Rating:

19 February 2018 | Susan

I bought two pairs of thermal safety gloves. They came within 3 days. They were the cheapest ones I found but are excellent value and do the job they should. I would highly recommend this site and their products.

1 of 1 people found this review helpful.

Was this helpful to you? Yes / No