Blaklader Workwear 2872 Waterproof Fleece Lined Work Gloves (Dark Navy/Yellow)

£11.62
(£13.94 Inc. VAT)
+
  • Pair of winter-lined, water resistant work gloves
  • PU (polyurethane) coated palms for excellent handling
  • Stretch material with elasticated wrists for full mobility
  • Ideal for working in cold weather conditions and cold storage
FREE UK delivery

On all orders of £40 and above.

Buying in bulk?

Find out about purchase orders.

Got a question?

Get in touch with our sales team.

Information

Blaklader Workwear 2872 Waterproof Fleece Lined Work Gloves (Dark Navy/Yellow)

Maximize your comfort and protection in poor weather conditions with the Blaklader Workwear 2872 Waterproof Fleece Lined Work Gloves (Dark Navy/Yellow). Featuring an insulating, lined interior and water-repellent exterior, users can remain warm and dry when working outdoors.

These gloves also include features to enhance your overall performance at work, with PU (polyurethane) coated palms to prevent injuries, and elasticated material in crucial areas that offer full dexterity.

What's Included?

  • 1 x Pair of Fleece Lined Gloves.

Sizing Information

To find your perfect size, please measure the circumference and length of your hands as described below, and match your measurement to our sizing table. If your measurement doesn't match exactly, we recommend choosing the size above for a comfortable fit.

Hand Measurement Chart

Size Circumference (mm) Length (mm)
Size 6 152mm 160mm
Size 7 178mm 171mm
Size 8 203mm 182mm
Size 9 229mm 192mm
Size 10 254mm 204mm
Size 11 279mm 215mm
Size 12 Over 279mm Over 215mm

How Do the Fleece Lined Work Gloves Protect Your Hands?

These gloves to protect your hands in more ways than one! With a warm lining inside and water-resistant exterior, you can remain protected and productive regardless of the weather conditions. However, they are also constructed with comprehensive features, such as PU coated palms and reinforced fingertips, thumbs and index fingers to provide effective protection against injuries and allow for unrestricted movement.

To ensure users are aware of the level of protection their profession requires them to have, these gloves have been tested to a variety of different standards. The results of the mechanical resistance tests under EN 388 can be found in the table below.

Performance Ratings

EN 388 (Protection Against Mechanical Risks)

  • EN 388: 2111X
Test Result
Abrasion Level 2
Cut Level 1
Tear Level 1
Puncture Level 1
Blade Cut N/A

Read our guide to EN 388 for more information.

Key Features and Benefits

  • PU coated palms for improved grip and control in wet conditions
  • Fleece lining inside for added warmth during winter months
  • Water-resistant exterior for protection and durability in poor weather
  • Chrome free materials for reduced skin irritation
  • Stretchy palms and elasticated wrists for full range of movement
  • Reinforced finger construction for longer life and increased sensitivity
  • Multiple areas of use; particularly useful in dirty, wet and heavy-duty environments

Who Can Use The Blaklader 2872 Gloves?

Due to their highly ergonomic and weather-friendly features, the Blaklader 2872 Gloves are optimal for outdoor work and the following applications:

Warmth During the Winter

Working outdoors in the colder seasons without protective gear can greatly inhibit your ability to complete tasks. The Blaklader Gloves feature an insulating fleece interior lining, which helps to retain heat and shield your hands from the weather.

Ergonomic Design for Better Performance at Work

Industries such as plumbing, mechanical engineering or gardening often result in the frequent use of wet, oily and slippery items. To ensure you are able to maintain a good grip whilst working, these gloves feature PU (polyurethane) coated palms, and reinforced fingertips to enhance your level of control.

The coating on the palms also act as a barrier against injuries caused from abrasions, cuts and punctures, helping to improve your overall performance at work.

Documentation

Delivery

Delivery

This item will be dispatched by Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

Orders that are placed before 14:00 on a working day are usually dispatched on the same day; for orders placed outside this timeframe, they are normally dispatched the next working day.

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

Order ValueUK Delivery Charge
Up to £39.99£4.95
£40.00 and overFREE

Please note: orders to NON-mainland UK and the Scottish highlands may be subject to an additional delivery charge, dependent on the size and value of the order.

What is EN 388?

What is EN 388?

You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.

There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.

How Do I Read the EN 388 Score?

Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.

Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.

Where Can I Find Out More?

This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.

Reviews

Be the first to Write a Review for this item!

Customers also bought