Aurelia 301 Flock Lined Chemical and Cleaning Gloves
Ensuring you are protected against chemicals and hazards is extremely important in an industrial setting. The Aurelia 301 Flock Lined Chemical and Cleaning Gloves are made to provide protection from chemicals and abrasions. Featuring a 300mm length to ensure your arms are protected from splashes, and a textured palm and fingertips to enhance grip, these gloves are ideal for cleaning and laboratory work.
What's Included?
Which Size is Right For Me?
The Aurelia 301 Cleaning Gloves come in in four handy sizes. To find your perfect size, measure the circumference and length of your hands (as shown in the diagram below) and match your measurement to the table below.
| Size | Palm Circumference | Hand Length |
|---|
| Size 7 (Small) | 178mm | 170mm |
| Size 8 (Medium) | 203mm | 182mm |
| Size 9 (Large) | 229mm | 192mm |
| Size 10 (Extra Large) | 254mm | 204mm |
Learn more about how to find your perfect size.
Who can Use The Aurelia 301 Gloves?
The Aurelia 301 Cleaning Gloves are ideal for any job that deals with chemicals, including:
- Janitorial work
- Laboratory work
- Sampling
- Chemists/Pharmaceutical industry
- Bathroom cleaning
- Window cleaning
- House cleaning
- Hotel cleaning and maintenance
- General maintenance work
- Food service
- Hospitals
- Kitchen cleaning
- General use
Which Chemicals Do The Aurelia 301 Gloves Protect Against?
The Aurelia 301 Cleaning Gloves are made to protect against most general cleaning chemicals. It has been specifically tested against the following:
- n-Heptane
- Sodium hydroxide
- Sulphuric acid
Tested To European Standards
EN388 (Mechanical Resistance)
| Hazard | Resistance Level |
| Abrasion Resistance | 3 |
| Cut Resistance | 1 |
| Tear Resistance | 0 |
| Puncture Resistance | 1 |
| ISO Cut Resistance | X |
EN374-1 (Chemical Resistance)
| Chemical | Permeation Performance |
|---|
| n-Heptane | Level 4 |
| Sodium Hydroxide (40%) | Level 6 |
| Sulphuric Acid (96%) | Level 2 |
kEY fEATURES AND bENEFITS
- Flock liner provides sweat absorption, so your hands stay dry and free of irritation even if you're using the gloves all day long
- Textured palm and fingertips offer better grip, control, and traction even in slippery conditions, so you can continue to be productive while performing various tasks
- The gloves are 300mm in length, adding extra coverage to your wrists and arms to protect from splashes and increasing your protection against chemicals and liquids
- The gloves' nitrile material is 0.4mm thick, ensuring thick protection against potential hazards
- Abrasion resistance level 3 means the gloves are able to withstand a number of associated risks
Technical Information
Product Codes:
- Small: 301/7
- Medium: 301/8
- Large: 305/9
- Extra Large: 305/10
Materials:
- Liner: Flock
- Coating: Nitrile
Length:
Thickness:
PPE Category:
Additional Documentation
Delivery
This item will be dispatched by Royal Mail, DPD courier or UPS courier.
The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).
Orders that are placed before 14:00 on a working day are usually dispatched on the same day; for orders placed outside this timeframe, they are normally dispatched the next working day.
UK Delivery Charges
Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.
| Order Value | UK Delivery Charge |
|---|
| Up to £39.99 | £4.95 |
| £40.00 and over | FREE |
Please note: orders to NON-mainland UK and the Scottish highlands may be subject to an additional delivery charge, dependent on the size and value of the order.
What is EN 388?
You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.
There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.
How Do I Read the EN 388 Score?
Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.
Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.
Where Can I Find Out More?
This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)