Aurelia 130 Fully-Coated Water-Resistant Work Gloves (Pack of 12 Pairs)
Nobody wants wet or dirty hands after handling wet or grimy objects. The Aurelia 130 Fully-Coated Water-Resistant Work Gloves (Pack of 12 Pairs) are designed to provide you with the protection needed to keep your hands dry and clean inside while you get stuck in to the task at hand, whether that's tending to your personal garden or handling wet or greasy items at work. These gloves are conveniently supplied in a pack of 12 pairs to give you more bang for your buck.
What's Included?
Which Size is Right For Me?
The Aurelia 130 Work Gloves are available in five handy sizes. To find your perfect size, measure the circumference and length of your hands (as shown in the diagram below) and match your measurement to the table below.
| Size | Circumference (mm) | Length (mm) |
|---|
| Size 7 | 178mm | 171mm |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
| Size 11 | 279mm | 215mm |
Learn more about how to find your perfect size.
Who Can Use The Aurelia 130 Work Gloves?
Fully coated in latex with a black sandy latex palm, the Aurelia 130 Work Gloves are ideal when handling anything wet, oily, or grimy. Perfect for the following uses and industries:
- Gardening
- Groundwork
- Warehouse/Logistics
- Waste Disposal
- Waste Management
- Cleaning
- General At-Home Use
Tested to European Standards
| Hazard | Resistance Level |
| Abrasion Resistance | 3 |
| Cut Resistance | 1 |
| Tear Resistance | 3 |
| Puncture Resistance | 1 |
| ISO Cut Resistance | X |
kEY fEATURES AND bENEFITS
- Fully coated latex to keep your hands dry and protected in wet conditions
- Full thumb dip design adds extra resistance, so you can continue with prolonged tasks with increased protection
- Hand Former technology means the glove is designed to tailor to your hand, offering comfort and a better fit
- Label free design means no scratching or irritation while you are wearing the gloves
- Supplied in a pack of 12 pairs for extra value and convenience
Save Money with Bulk Purchasing
The Aurelia 130 Wet Grip Gloves are supplied in a bulk pack of 12 pairs for extra cost convenience and access to multiple spares.
Tear and Abrasion Resistant to Keep Gloves Lasting Longer
When you're handling a variety of items, it's normal to create a lot of friction that can cause potential wear and tear to your gloves. That's why the Aurelia 130 Water and Oil Resistant Gloves feature great levels of tear and abrasion resistance, ensuring they can be used repeatedly without breaking down due to pulling, friction, and abrasive materials.
Fantastic grip of Wet and Oily Items
The Aurelia 130 Water resistant Grip Gloves feature a sandy latex palm coating that provides excellent grip of wet, oily, and greasy items. This means your dexterity is not hindered by an item being wet, and your overall health and safety is improved by minimising the risk of accidents from dropped items.
Technical Information
Product Codes:
- Small: 130/7
- Medium: 130/8
- Large: 130/9
- Extra Large: 130/10
- Extra Extra Large: 130/11
Materials:
- Liner: Nylon
- Coating: Latex
PPE Category:
Additional Documentation
Delivery
This item will be dispatched by Royal Mail, DPD courier or UPS courier.
The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).
Orders that are placed before 14:00 on a working day are usually dispatched on the same day; for orders placed outside this timeframe, they are normally dispatched the next working day.
UK Delivery Charges
Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.
| Order Value | UK Delivery Charge |
|---|
| Up to £39.99 | £4.95 |
| £40.00 and over | FREE |
Please note: orders to NON-mainland UK and the Scottish highlands may be subject to an additional delivery charge, dependent on the size and value of the order.
What is EN 388?
You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.
There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.
How Do I Read the EN 388 Score?
Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.
Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.
Where Can I Find Out More?
This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.
