Ansell NitraSafe 28-359 Fully Coated Kevlar Work Gloves
When handling sharp objects and heavy metals, it is important that hands are protected from harm while also remaining comfortable enough to work. The Ansell NitraSafe 28-359 Fully Coated Kevlar Work Gloves combine flexibility with cut and abrasion resistance for optimal comfort and protection. They are also available in a choice of sizes to provide the most comfortable fit.
The product code for the pair of gloves is: 28-359.
Key Features and Benefits of the 28-359 Gloves
- Comfortable design is easy to wear while handling objects
- Cotton jersey and Kevlar lining for flexibility and fit
- Nitrile coating offers secure grip when handling oily parts
- Nitragold cuff for comfort and easier donning
- Antistatic construction for improved safety
- EN 388 Level 4 abrasion resistance to protect hands when handling rough and coarse objects
- EN 388 Level 3 cut resistance for protection from sharp objects and sheet metals
- Washable at 60°C for ongoing hygiene maintenance
- Available in a range of sizes for a comfortable fit on both hands
- Suitable for a range of applications, from building and construction to materials handling and manufaturing
Enhanced Protection
With very good resistance against cuts and abrasions, the 28-359 gloves offer enhanced protection when handling sharp and rough objects. This will help to keep hands safer in a wide range of tasks, and the nitrile coating improves gripping when handling oily parts to further reduce the risk of hands coming to harm.
Flexibility and Comfort
While some gloves may provide suitable protection while handling sharp objects, the NitraSafe 28-359 Cut-Resistant Work Gloves have been designed to offer excellent levels of protection while allowing hands to also remain comfortable. They feature a cotton jersey and Kevlar-reinforced lining for flexibility and a comfortable fit, ensuring hands can perform their best without compromise to safety.
Applications of the NitraSafe 28-359 Gloves
The Ansell NitraSafe Fully Coated Kevlar Work Gloves are suitable for the following applications:
- Automotive
- Building materials handling
- Construction
- Machinery and equipment
- Metal fabrication
- Pre-fabricated materials use
- Press and stamping
- Sheet metals and metalwork
- Steel bar manufacture and handling
- Sub-assembly mounting
- Timber works and construction
Testing of the Ansell NitraSafe 28-359 Gloves
The Ansell NitraSafe Disposable Nitrile Gloves meet the following specifications:
- European Directive 89/686/EEC
- EN 420:2003 + A1:2009
- EN 388:2003: 4331
- EN 407: X1XXXX
The table below showcases the test results of the Ansell NitraSafe 28-359 gloves according to EN 388 Mechanical Risk specifications.
| Hazard | Resistance Rating |
| Abrasion | Level 4 |
| Cut | Level 3 |
| Tear | Level 3 |
| Puncture | Level 1 |
Sizing of the Ansell NitraSafe Gloves
The Ansell NitraSafe 28-359 Gloves are available in a choice of sizes, making them suitable for most users. Please consult the table below for details, then select the required size from the drop-down menu at the top of the page. The glove length will range from 255mm to 280mm.
| Glove Size | Hand Circumference (mm) | Hand Length (mm) |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
Documentation for the Ansell 28-359 Gloves
| Conformity Statement | Instructions for Use |
 | |
Delivery
This item will be dispatched by Royal Mail, DPD courier or UPS courier.
The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).
Orders that are placed before 14:00 on a working day are usually dispatched on the same day; for orders placed outside this timeframe, they are normally dispatched the next working day.
UK Delivery Charges
Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.
| Order Value | UK Delivery Charge |
|---|
| Up to £39.99 | £4.95 |
| £40.00 and over | FREE |
Please note: orders to NON-mainland UK and the Scottish highlands may be subject to an additional delivery charge, dependent on the size and value of the order.
What is EN 388?
You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.
There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.
How Do I Read the EN 388 Score?
Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.
Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.
Where Can I Find Out More?
This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)