Ansell AlphaTec 55-306 Ambidextrous Neoprene Gauntlet Gloves
Designed to protect the hands from harsh chemicals and risks of abrasions, the Ansell AlphaTec 55-306 Ambidextrous Neoprene Gauntlet Gloves are ideal for providing hand protection in medium-duty environments. They also offer good dexterity for comfort and convenience, and an ambidextrous design and rolled beaded gauntlet cuff for quicker donning and safer wear.
The product code for the gauntlet gloves is: 55-306.
Key Features and Benefits of the 55-306 Gauntlets
- Designed to protect the hands in medium-duty environments where chemicals are present
- Highly resistant to most acids, alcohols, oils, lubricants, and hydrocarbon
- Resistant to Type I allergies for increased safety of wear
- Rolled beaded gauntlet cuffs for easier donning
- Ambidextrous design allows gloves to be applied on either hand for quicker application
- Gloves allow for dexterity and comfort while working
- Gloves are unlined for effective cleaning
- Available in a range of sizes for a comfortable fit
- Suitable for a range of applications, from biotechnologies and blending of liquids to chemical handling and medical research
Protection Against Chemicals
When working in environments where harsh chemicals are present, it is paramount to ensure that the hands are sufficiently protected. The AlphaTec 55-306 Gauntlet Gloves protect the hands and wrists from most acids, alcohols, oils lubricants, and hydrocarbons. This means that they are suitable for a wide range of tasks, allowing the gauntlet gloves to be worn on multiple occasions.
Applications of the Ansell AlphaTec 55-306 Gauntlet Gloves
The Ansell AlphaTec Ambidextrous Neoprene Gauntlet Gloves are suitable for the following applications:
- Biotechnologies
- Blending of liquids
- Chemical and medical research
- Chemical handling
- Chemical industry
- Chemicals mixing, handling, transferring, pouring, and blending
- Pharmaceutical and life sciences
- Product handling (chemical/biological)
- Product protection applications
Testing of the Ansell AlphaTec 55-306 Gauntlets
The Ansell AlphaTec Ambidextrous Neoprene Gauntlet Gloves meet the following specifications:
- European Directive 89/686/EEC
- EN 420:2003 + A1:2009
- EN 388:2003:3101
- EN 374:2003:ACJKL
The table below showcases the test results of the Ansell AlphaTec 55-306 gauntlet gloves according to EN 388:
| Hazard | Resistance Rating |
| Abrasion | Level 3 |
| Cut | Level 1 |
| Tear | Level 0 |
| Puncture | Level 1 |
Sizing of the Ansell AlphaTec Gauntlets
The Ansell AlphaTec 55-306 Gauntlets are available in a choice of sizes, making them suitable for most users. Please consult the table below for details, then select the required size from the drop-down menu at the top of the page. The gauntlet gloves have a thickness of 0.76mm and a length of 813mm (port size 250mm).
| Glove Size | Hand Circumference (mm) | Hand Length (mm) |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
Documentation for the Ansell AlphaTec 55-306 Gauntlets
| Conformity Statement | Instructions for Use |
 | |
Delivery
This item will be dispatched by Royal Mail, DPD courier or UPS courier.
The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).
Orders that are placed before 14:00 on a working day are usually dispatched on the same day; for orders placed outside this timeframe, they are normally dispatched the next working day.
UK Delivery Charges
Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.
| Order Value | UK Delivery Charge |
|---|
| Up to £39.99 | £4.95 |
| £40.00 and over | FREE |
Please note: orders to NON-mainland UK and the Scottish highlands may be subject to an additional delivery charge, dependent on the size and value of the order.
What is EN 388?
You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.
There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.
How Do I Read the EN 388 Score?
Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.
Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.
Where Can I Find Out More?
This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.
