UCi Micro Dot Handling Gloves
The UCi Micro Dot Handling Gloves are a lightweight, close fitting knitted glove which offers good dexterity. The Micro Dot Handling Gloves are made using cotton and lycra which ensures breathability and elasticity.
The Micro Dot Handling Gloves have PVC micro dots which provide additional grip especially on small items. The Micro Dot Handling Gloves are an exceptionally soft, seamless glove which provides great comfort for the wearer.
CLEANING/MAINTENANCE
Both new and used gloves should be thoroughly inspected before being worn to ensure no damage is present. Gloves should not be left in a contaminated condition if reuse is intended in which case gloves should be cleaned as far as possible. Laundering of this glove is not recommended.
Care should be taken when removing gloves to avoid any contaminant contacting bare skin.
STORAGE
Gloves should be ideally stored in cool dry conditions in the original package and out of direct sunlight.
OBSOLESCENCE
When stored as recommended will not suffer change in mechanical properties for up to 3 years from the date of manufacture. Service life cannot be specified and depends on the application and responsibility of the user to ascertain the suitability of the glove for the intended use.
GENERAL
None of the materials or processes used in the manufacture of these products are known to be harmful to the wearer.
Sizing Information
The Micro Dot Handling Gloves are available in four different sizes, meaning that you should be able to find the size that's right for you. To measure your hand, measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together as seen in the image below.
Size | Circ. of Hand (mm) |
Size 7 | 178mm |
Size 8 | 203mm |
Size 9 | 229mm |
Size 10 | 254mm |
Please note these gloves are designed to have a close fit. You may wish to select a size above your usual size if you prefer a looser fit.
PLEASE NOTE
The results of physical tests should help in glove selection, however it must be understood that actual conditions of use cannot be simulated and it is the responsibility of the end user and not the manufacturer to determine glove suitability for the intended use.
Documentation for the UCI Gloves
Conformity Statement | Instructions for Use |
| |